AWE Tuning 11-18 VW Mk6 GLI 2.0T - Mk6 Jetta 1.8T Touring Edition Exhaust - Polished Silver Tips 3015-22058

AWE Tuning 11-18 VW Mk6 GLI 2.0T - Mk6 Jetta 1.8T Touring Edition Exhaust - Polished Silver Tips Our exhausts have earned praise from owners and the press alike, due to their unique "Jekyll and Hyde" personality. We spend considerable time and effort during development to achieve remarkable civility when idling and cruising at part throttle, while also producing a war-cry wail when full throttle is applied. Sophisticated, refined, and powerful, all at once. Highlights include: Fully mandrel bent tubing Available with chrome silver or diamond black finishes Thick .065" wall T304 stainless steel tubing Stainless steel internal muffler and resonator construction Stainless steel MIG and TIG welds Stainless steel T-bolt clamps Double walled exhaust tips to reduce heat discoloration In house dyno developed and tested No CEL - Guaranteed Featuring the AWE Lifetime Exhaust Warranty Track Edition Similarly, The Track Edition Exhaust replaces the factory exhaust and includes a straight-through resonator, but to allow a more aggressive exhaust tone, the Track Edition does not include the rear resonator. Touring Edition The Touring Edition Exhaust replaces the factory exhaust from the downpipe back, featuring a straight-through resonator and AWE's 180 Technology™ in the rear muffler section. Sound Perfection: AWE 180 Technology™ As exhaust gases exit the 2.0L Turbo engine and flow into an AWE 180 Technology™ equipped resonator, they pass through strategically located ports, and into reflection chambers. Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. By controlling the size and location of the ports and the chambers, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves re-join the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies. Why did we choose 2.5 inch and not 3.0 inch diameter for our MK6 exhaust? Our first 2.0T exhaust prototypes were indeed 3.0 inch, but we found that the effort it took to move the large mass of air in the 3.0 inch system at lower rpms resulted in a loss of torque with very little offsetting gain up top. Take a look at our 3.0 inch prototype dyno sheets here and see why a 3.0 inch system is not appropriate for this car.