Finance with as little as $0 downLearn more
Generation:All years2013-2018 Sedan2013-2019 Coupe2016-2019 ATS-V Coupe2016-2018 ATS-V Sedan

2013-2019 Cadillac ATS Coupe wheels and rims

318 designs fit a 2013-2019 Cadillac ATS Coupe at stock height. Pick your year and trim and the list gets exact.

Looking for wheels for your ATS? There's a couple hundred designs that fit, and the factory brakes are what rule the rest out. A big caliper needs room behind the spoke, and that's what rules a thin spoke design out. Pick the year and trim and you'll see what clears.

It's 5x115, so the wheels you see here already match the hubs. If we haven't measured your exact car yet, the card says so instead of guessing.

2013-2019 Cadillac ATS Coupe wheel specs

Bolt pattern
5x115
Center bore
70.3 mm
Thread pitch
12x1.5
Lug type
nuts
Set type
Square or staggered
Submodels
  • ATS Coupe AWD, 2013-2019
  • ATS Coupe RWD, 2013-2019
Fitment check
Every wheel here is checked against your exact year, trim and brake package before you buy
Sort:
318 of 318
Show 48 more of 270 designs

Filters cover all 318 designs for this search. Start over

Common questions

What bolt pattern is a 2013-2019 Cadillac ATS Coupe?
It's 5x115, and every wheel on this page is drilled for it. Hub bore and thread pitch are in the specs table, which is what you want if the set needs rings.
Can I run a staggered set on it?
Yes. Plenty of the sets here come as a wider pair for the rear, and they're marked once you've told us the year and trim.
Will you tell me if it doesn't fit?
Yes. A wheel that doesn't clear your car never shows up in the first place, and if we haven't measured your exact ATS yet, the card says so rather than guessing.

Fitment data last updated November 2, 2026.

2013-2019 Cadillac ATS Coupe Wheels and Rims | TunerMob