2007-2013 BMW 3 Series Coupe E92,E93 wheels and rims

859 designs fit a 2007-2013 BMW 3 Series Coupe E92,E93 at stock height. Pick your year and trim and the list gets exact.

The E92 and the convertible share the E46's pattern, and the bore is big enough that rings are rare. The 335i's front caliper is a single piston unit, which means spoke clearance is hardly ever your problem here. The fender is where the limit lives instead. Tell us the trim and how it sits and the list narrows with it.

2007-2013 BMW 3 Series Coupe E92,E93 wheel specs

Bolt pattern
5x120
Center bore
72.56 mm
Thread pitch
12x1.5
Lug type
bolts
Set type
Square or staggered
Submodels
  • 3 Series 2dr RWD (E92,E93), 2007-2013
  • 3 Series 2dr X-Drive (E92,E93), 2007-2013, AWD
Fitment check
Every wheel here is checked against your exact year, trim and brake package before you buy
Sort:
859 of 859
Show 48 more of 811 designs

Filters cover all 859 designs for this search. Start over

Common questions

What bolt pattern is a 2007-2013 BMW 3 Series Coupe E92,E93?
It's 5x120, and every wheel on this page is drilled for it. Hub bore and thread pitch are in the specs table, which is what you want if the set needs rings.
Can I run a staggered set on it?
Yes. Plenty of the sets here come as a wider pair for the rear, and they're marked once you've told us the year and trim.
Will you tell me if it doesn't fit?
Yes. A wheel that doesn't clear your car never shows up in the first place, and if we haven't measured your exact 3 Series yet, the card says so rather than guessing.

Fitment data last updated November 2, 2026.