1970-1981 Pontiac Firebird/Trans Am wheels and rims

98 designs fit a 1970-1981 Pontiac Firebird/Trans Am at stock height. Pick your year and trim and the list gets exact.

Looking for wheels for your Firebird/Trans Am? There's dozens of designs drilled for it, though cars this age get swapped and redrilled, so go by what's on the car rather than what left the factory. Tell us what it's running and we'll keep the list to that.

It's 5x120.7, so the wheels you see here already match the hubs. If we haven't measured your exact car yet, the card says so instead of guessing.

1970-1981 Pontiac Firebird/Trans Am wheel specs

Bolt pattern
5x120.7
Center bore
70.3 mm
Thread pitch
7/16
Lug type
nuts
Set type
Square or staggered
Submodels
  • Firebird/Trans Am, 1970-1981
Fitment check
Every wheel here is checked against your exact year, trim and brake package before you buy
Sort:
98 of 98
Show 48 more of 50 designs

Filters cover all 98 designs for this search. Start over

Common questions

What bolt pattern is a 1970-1981 Pontiac Firebird/Trans Am?
It's 5x120.7, and every wheel on this page is drilled for it. Hub bore and thread pitch are in the specs table, which is what you want if the set needs rings.
Can I run a staggered set on it?
Yes. Plenty of the sets here come as a wider pair for the rear, and they're marked once you've told us the year and trim.
Will you tell me if it doesn't fit?
Yes. A wheel that doesn't clear your car never shows up in the first place, and if we haven't measured your exact Firebird/Trans Am yet, the card says so rather than guessing.

Fitment data last updated November 1, 2026.

1970-1981 Pontiac Firebird/Trans Am Wheels and Rims | TunerMob