Finance with as little as $0 downLearn more

1984-1988 Pontiac Fiero wheels and rims

224 designs fit a 1984-1988 Pontiac Fiero at stock height. Pick your year and trim and the list gets exact.

Looking for wheels for your Fiero? There's a couple hundred designs drilled for it, though cars this age get swapped and redrilled, so go by what's on the car rather than what left the factory. Tell us what it's running and we'll keep the list to that.

Bolt pattern is 5x100. Every wheel on this page is drilled that way. If we haven't measured your exact car yet, the card says so instead of guessing.

1984-1988 Pontiac Fiero wheel specs

Bolt pattern
5x100
Center bore
54.1 mm
Thread pitch
12x1.5
Lug type
nuts
Set type
Square
Submodels
  • Fiero, 1984-1988
Generations
  • 1984-1988 Pontiac Fiero, 5x100
Fitment check
Every wheel here is checked against your exact year, trim and brake package before you buy
Sort:
224 of 224
Show 48 more of 176 designs

Filters cover all 224 designs for this search. Start over

Common questions

What bolt pattern is a 1984-1988 Pontiac Fiero?
It's 5x100, and every wheel on this page is drilled for it. Hub bore and thread pitch are in the specs table, which is what you want if the set needs rings.
Can I go wider than the factory wheel?
Usually, yes, and the picker is what tells you where that stops on yours. Want the wheel out at the fender? Flip on the aggressive option and we'll show you what still clears.
Will you tell me if it doesn't fit?
Yes. A wheel that doesn't clear your car never shows up in the first place, and if we haven't measured your exact Fiero yet, the card says so rather than guessing.

Fitment data last updated November 2, 2026.