What bolt pattern is a Lexus RC F

It's 5x114.3, the same as every RC and IS. The bore's 60.1 mm, so a ring goes with most aftermarket wheels. On an F it's the six piston front that rejects designs, not the pattern. Tell us the trim and we'll show what clears.

Will IS350 wheels fit an RC 350

Yes, same hub, pattern and bore, and the two share the F Sport calipers, so the brake row matches. The RC's rear quarter takes the wide end of that range with a little more room. Keep an AWD car square, and pick your trim up top so the list knows which arch it's working with.

Can I run a staggered setup on an RC F

Yes, and the factory did. A square set is possible on paper, but the front caliper limits the front so much that most owners keep the stagger. Tell us what you're after and we'll show what clears.

What size wheels fit an RC F

Start from the factory stagger on 19s, which is already wide. Something lighter in those sizes is what gets ordered, and spoke depth is what'll decide it. Tell us how the car sits.

Lexus RC Wheels and Rims by Generation, 2013-2025

Shopping for an RC? Think of it as an IS under a coupe body, and the rear quarter is where the two part ways. The RC F is the one people ask about most. It came staggered from the factory, and its big Brembo front is what rules out a lot of designs. Even without the F badge the trim changes the answer, since the 350 carries more caliper than the smaller engine cars. Tell us which one you've got.

If you're shopping for an RC F, plan on a staggered set. The factory runs a different offset at each end, so four of one wheel never looks right front and rear. Most RC F owners end up buying lighter instead of bigger, since the arch doesn't leave much room to grow. On a rear drive RC, going a step wider than the F Sport size is the usual move. AWD cars are the exception, and they stay square to keep the transfer case happy.

Lexus RC wheel specs

Bolt pattern: 5x114.3
Center bore: 60.1 mm
Thread pitch: 12x1.5
Lug type: nuts
Set type: Square or staggered
Submodels: RC 200/300/350 RWD, 2013-2025
RC 350 AWD, 2013-2025
RC-F, 2015-2025
RC 300 AWD, 2016-2025
Generations: 2013-2025 Lexus RC, 5x114.3
2015-2025 Lexus RC-F, 5x114.3
Fitment check: Every wheel here is checked against your exact year, trim and brake package before you buy

Common questions

What bolt pattern is a Lexus RC F: It's 5x114.3, the same as every RC and IS. The bore's 60.1 mm, so a ring goes with most aftermarket wheels. On an F it's the six piston front that rejects designs, not the pattern. Tell us the trim and we'll show what clears.
Will IS350 wheels fit an RC 350: Yes, same hub, pattern and bore, and the two share the F Sport calipers, so the brake row matches. The RC's rear quarter takes the wide end of that range with a little more room. Keep an AWD car square, and pick your trim up top so the list knows which arch it's working with.
Can I run a staggered setup on an RC F: Yes, and the factory did. A square set is possible on paper, but the front caliper limits the front so much that most owners keep the stagger. Tell us what you're after and we'll show what clears.
What size wheels fit an RC F: Start from the factory stagger on 19s, which is already wide. Something lighter in those sizes is what gets ordered, and spoke depth is what'll decide it. Tell us how the car sits.

Lexus RC wheels and rims

Lexus RC wheel specs

Common questions

Brands that fit the RC

Shop RC wheels by bolt pattern, size and finish

More for the RC

Other Lexus models

RC wheels by generation