What bolt pattern is a Q50

It's 5x114.3 on both cars, and the G coupes and both Zs share it, so there's a lot of used stuff that bolts on. The hub's 66.1 mm, close to what many wheels are drilled at, so rings only come up on some designs. Tell us the trim and we'll show what clears.

Can I run a staggered setup on a Q50 AWD

No, keep an AWD car square. Once the tire widths differ the rolling circumference does too, and the transfer case pays for it every mile. Rear drive Q50s are where the staggers live. Tell us which one you've got and we'll show what fits.

Will G37 coupe wheels fit a Q50

They bolt on, same hub and thread. The coupe runs lower offsets, so a coupe rear set tends to sit outside the quarter panel at factory height. Save your car first and anything that hangs past the quarter won't show up.

What size wheels fit a Q50 Red Sport

A lighter set in the factory sizes is most of what leaves here for a Red Sport, since the arch isn't generous. The bigger front caliper is what rejects thin spokes. Tell us the trim and how the car sits and we'll show what clears.

2014-2024 Infiniti Q40/Q50 Sedan Wheels and Rims

Shopping a Q50? The Q40, which is the G37 sedan with a new badge, lives on this page too. Base and Luxe cars on the smaller caliper have the most room to work with, and Red Sport and AWD cars each change the answer, so we'll need the trim. Tell us that and the year, and you'll only see what clears.

The sedan fender is not the coupe fender. Offsets sit higher here, so a G37 coupe set tends to poke at the rear on a Q50 rather than sit flush. Rear drive cars can take more tire at the back. AWD cars stay square, and that's the drivetrain talking rather than a preference.

2014-2024 Infiniti Q40/Q50 Sedan wheel specs

Bolt pattern: 5x114.3
Center bore: 66.1 mm
Thread pitch: 12x1.25
Lug type: nuts
Set type: Square or staggered
Submodels: Q50 Sedan AWD, 2014-2024
Q50 Sedan RWD, 2014-2024
Q50S Sedan AWD (Incl. Red Sport), 2014-2024
Q50S Sedan RWD (Incl. Red Sport), 2014-2024
Generations: 2014-2024 Infiniti Q40/Q50 Sedan Q40/Q50, 5x114.3
Fitment check: Every wheel here is checked against your exact year, trim and brake package before you buy

Common questions

What bolt pattern is a Q50: It's 5x114.3 on both cars, and the G coupes and both Zs share it, so there's a lot of used stuff that bolts on. The hub's 66.1 mm, close to what many wheels are drilled at, so rings only come up on some designs. Tell us the trim and we'll show what clears.
Can I run a staggered setup on a Q50 AWD: No, keep an AWD car square. Once the tire widths differ the rolling circumference does too, and the transfer case pays for it every mile. Rear drive Q50s are where the staggers live. Tell us which one you've got and we'll show what fits.
Will G37 coupe wheels fit a Q50: They bolt on, same hub and thread. The coupe runs lower offsets, so a coupe rear set tends to sit outside the quarter panel at factory height. Save your car first and anything that hangs past the quarter won't show up.
What size wheels fit a Q50 Red Sport: A lighter set in the factory sizes is most of what leaves here for a Red Sport, since the arch isn't generous. The bigger front caliper is what rejects thin spokes. Tell us the trim and how the car sits and we'll show what clears.

2014-2024 Infiniti Q40/Q50 Sedan wheels and rims

2014-2024 Infiniti Q40/Q50 Sedan wheel specs

Common questions

Brands that fit the Q40/Q50 Sedan

Shop Q40/Q50 Sedan wheels by bolt pattern, size and finish

More for the Q40/Q50 Sedan

Other Infiniti models