2022+ Toyota GR86 Wheels and Rims, Fitment Checked | TunerMob
Our catalog is briefly unavailable. Your cart is safe. Give it a moment and refresh to see wheels for your car.
2022+ Toyota GR86 wheels and rims
385 designs fit at least one 2022+ Toyota GR86 at stock height. Pick your exact year and trim for guaranteed sizes.
GR86 owners buy wheels for a reason the car gives them: the stock 215 tire is the weak link, and a wider wheel is how you fit a 245 or 255 under it. That is why the ZN8 threads all start with 18x9.5 and end in an argument about offset. What clears depends on the trim and on how the car sits, and the page sorts both.
The hub is 5x100 with a 56.1 mm bore and M12x1.25 studs, shared with the BRZ and with the older ZN6 and FR-S, so the used market is deep. Brembo cars carry a bigger front caliper and lose a little spoke clearance. Nothing else on the car fights you: no big fender lip, and an arch that rolls cleanly if you go past the window.
Square versus staggered is the real decision. Track day owners keep it square so four tires rotate and the car stays neutral, usually a 17 or 18 in the widest width the front allows. Street cars run the rear a half inch wider for the stance and the traction. A 17 gives you sidewall and cheaper tires, an 18 keeps the stock look, and a 19 or 20 is a show move the 2.4 liter does not love. Tell the page your year, trim and ride height and it keeps only the sets that clear.
2022+ Toyota GR86 wheel specs
Bolt pattern
5x100
Center bore
56.1 mm
Thread pitch
12x1.25
Lug type
nuts
Set type
Square or staggered
Submodels and brake packages
GR86, 2022-2026
GR86 (Brembo Brakes), 2025-2026
Generations
2022+ Toyota GR86, 5x100
Fitment check
Run against your exact year, trim and brake package before the set ships
Sort:
0 of 0
Nothing in the catalogue fits that combination yet.
Common questions
Can I run a staggered setup on a GR86
It is rear wheel drive, so different widths front and rear cause no drivetrain issue. You give up rotation and a little of the balance that makes the car fun, which is why track owners run square. Street builds run a mild stagger and never miss it. Pick your exact car above and the page shows what fits it before you buy.
Will 18x9.5 +38 fit a GR86
Pick your suspension state in the fitment check, and if that combination shows unverified we hand check the set before it ships. Pick your exact car above and the page shows what fits it before you buy.
What bolt pattern is a GR86
5x100, 56.1 mm center bore, M12x1.25 studs. Identical to the Subaru BRZ, the 2013 to 2020 86 and the Scion FR-S, and to the 2014 and older WRX, which is why so many ZN6 sets end up on ZN8 cars. The 56.1 bore is small, so budget for hub rings with nearly any aftermarket design.
Do ZN6 wheels fit a ZN8
Yes on pattern and bore, and usually on clearance. A set from an FR-S at a mid range offset fits the GR86. The Brembo package on the ZN8 is the one place the newer car is tighter, so check the brake class before you move a set over. What clears depends on the trim and on how the car sits, and the page sorts both.