Finance with as little as $0 downLearn more
Generation:All years1968-19702005-2010 AWD2006-2010 RWD2011-2014 RWD2011-2017 AWD2015+ OEM Widebody2015+ RWD2018+ AWD

2005-2010 Dodge Charger AWD wheels and rims

467 designs fit a 2005-2010 Dodge Charger AWD at stock height. Pick your year and trim and the list gets exact.

Your Charger wants width in the back, and that's where the fit gets interesting. Too much of it and you're rolling fenders or wearing the inside edge off a tire. Want to run a stagger? Say so and we'll show you what still clears.

It's 5x115, so the wheels you see here already match the hubs. If we haven't measured your exact car yet, the card says so instead of guessing.

2005-2010 Dodge Charger AWD wheel specs

Bolt pattern
5x115
Center bore
71.5 mm
Thread pitch
14x1.5
Lug type
nuts
Set type
Square
Submodels
  • Charger AWD, 2005-2010
Fitment check
Every wheel here is checked against your exact year, trim and brake package before you buy
Sort:
467 of 467
Show 48 more of 419 designs

Filters cover all 467 designs for this search. Start over

Common questions

What bolt pattern is a 2005-2010 Dodge Charger AWD?
It's 5x115, and every wheel on this page is drilled for it. Hub bore and thread pitch are in the specs table, which is what you want if the set needs rings.
Can I go wider than the factory wheel?
Usually, yes, and the picker is what tells you where that stops on yours. Want the wheel out at the fender? Flip on the aggressive option and we'll show you what still clears.
Will you tell me if it doesn't fit?
Yes. A wheel that doesn't clear your car never shows up in the first place, and if we haven't measured your exact Charger yet, the card says so rather than guessing.

Fitment data last updated November 2, 2026.