Finance with as little as $0 downLearn more
Generation:All years · 1967-20251967-19701971-19811982-19921993-20022010-20152012-2015 ZL12016-20252017-2025 ZL1

Chevrolet Camaro wheels and rims

1307 designs fit a 1967-2025 Chevrolet Camaro at stock height. Pick your year and trim and the list gets exact.

Sixth gen Camaros have an easy hub and a hard fender. SS and ZL1 cars came staggered with a lot of tire already, and they sit in their own brake rows. Base cars leave you more to play with. Tell us the year and trim and we'll show what clears the caliper on yours.

Fourth gen cars and older use 5x120.7. That fraction of a millimeter is enough to ruin a set, so check the year before you buy used. Newer cars are 5x120, with a 66.9 mm bore that's odd enough to need rings on more designs than you'd expect from a GM. Brembo trims start higher in the table, and it's those calipers that reject a design long before the fender does.

What people order is a 20 with more tire at the back for the street. Track cars go square on an 18 or a 19, so the set rotates and the sidewall survives the curbing. Keep the tire near the factory diameter on an SS and the traction control doesn't start second guessing you. That's the only part of this that isn't taste.

Chevrolet Camaro wheel specs

Bolt patterns
5x120 (2010-2025) and 5x120.7 (1967-2002)
Center bore
66.9 or 70.3 mm
Thread pitch
7/16 or 12x1.5 or 14x1.5
Lug type
nuts
Set type
Square or staggered
Submodels and brake packages
  • Camaro, 1967-2002
  • Camaro (No Brembo), 2010-2015
  • Camaro SS, 2010-2015
  • Camaro ZL1/1LE, 2012-2015
  • Camaro w/ Brembo Brakes, 2016-2025
  • Camaro w/ Standard Brakes, 2016-2025
  • Camaro SS 1LE, 2017-2025
  • Camaro ZL1, 2017-2025
  • Camaro ZL1 1LE, 2018-2025
Generations
Fitment check
Every wheel here is checked against your exact year, trim and brake package before you buy
Sort:
1307 of 1307
Show 48 more of 1259 designs

Filters cover all 1307 designs for this search. Start over

Common questions

What bolt pattern is a 2018 Camaro SS
It's 5x120, and that hasn't changed since the fifth gen. The bore's 66.9 mm, so a ring comes up on more designs than you'd expect from a GM. Fourth gen cars and older use 5x120.7, which isn't the same thing and won't swap. Tell us the year, trim and ride height and we'll show what clears.
Can I run a staggered setup on a Camaro
Yes, and GM did it from the factory on the SS, the 1LE and the ZL1. It's rear drive with nothing to upset, so the only cost is rotation, and you'll feel that at tire time. Owners taking a 1LE to the track often run square so the front gets the same rubber as the rear. Tell us the trim and anything that hits a caliper drops off.
Will C8 Corvette wheels fit a Camaro
They bolt on, since the pattern, bore and thread all match. Whether they clear is another question, because the Corvette runs its own widths and offsets. Pick your trim up top and the widths that clear are the only ones you'll see.
What size wheels are on a Camaro ZL1
The factory wheel is already wide, so a lighter set in the same sizes is what most owners order. There's no spare room in the arch to go bigger. Tell us the year, trim and ride height and we'll show what clears.

Fitment data last updated November 4, 2026.

Camaro wheels by generation