Finance with as little as $0 downLearn more
Generation:All years1963-19651995-1999

1963-1965 Buick Riviera wheels and rims

59 designs fit a 1963-1965 Buick Riviera at stock height. Pick your year and trim and the list gets exact.

Your Riviera is old enough that the spec sheet and the car don't always agree. If it's been apart, measure the pattern yourself before you order anything. Once you know what you've got, tell us and we'll show you what bolts up.

Bolt pattern is 5x127. Every wheel on this page is drilled that way. If we haven't measured your exact car yet, the card says so instead of guessing.

1963-1965 Buick Riviera wheel specs

Bolt pattern
5x127
Center bore
78.3 mm
Thread pitch
1/2
Lug type
nuts
Set type
Square or staggered
Submodels
  • Riviera, 1963-1965
Fitment check
Every wheel here is checked against your exact year, trim and brake package before you buy
Sort:
59 of 59
Show 11 more of 11 designs

Filters cover all 59 designs for this search. Start over

Common questions

What bolt pattern is a 1963-1965 Buick Riviera?
It's 5x127, and every wheel on this page is drilled for it. Hub bore and thread pitch are in the specs table, which is what you want if the set needs rings.
Can I run a staggered set on it?
Yes. Plenty of the sets here come as a wider pair for the rear, and they're marked once you've told us the year and trim.
Will you tell me if it doesn't fit?
Yes. A wheel that doesn't clear your car never shows up in the first place, and if we haven't measured your exact Riviera yet, the card says so rather than guessing.

Other Riviera generations

Fitment data last updated November 2, 2026.