2001-2009 Honda S2000 Wheels and Rims, Fitment Checked | TunerMob
Our catalog is briefly unavailable. Your cart is safe. Give it a moment and refresh to see wheels for your car.
2001-2009 Honda S2000 wheels and rims
65 designs fit at least one 2001-2009 Honda S2000 at stock height. Pick your exact year and trim for guaranteed sizes.
S2000 wheels are an offset puzzle more than a width puzzle. A low offset wheel that looks right on a 350Z pokes badly here. Pattern is 5x114.3 with a 70.1 mm bore and M12x1.5 nuts, and that 70.1 is unusual for a Honda. Tell the page your year, trim and ride height and it keeps only the sets that clear.
The buy is a 17 stagger a step wider than the AP2 sizes, on a 225 and 255, or a square 17 at the widest width the front allows for the track cars that want to rotate. Rear drive, no drivetrain penalty for a stagger, and the factory did it, but the car is happiest balanced, which is why the square track sets exist. The fender decides the width and the caliper decides the rest, so pick your trim above and the page answers it.
What goes wrong: the rear fender is tight and the car picks up a lot of rear camber when lowered, so a wide rear at a low offset rubs the inner lip before it looks aggressive. The 70.1 bore is bigger than the 64.1 most Honda wheels are made for, so a wheel bored for a Civic does not go over the S2000 hub at all. Keep the overall diameter near the factory size and the AP2's stability control stays calibrated.
2001-2009 Honda S2000 wheel specs
Bolt pattern
5x114.3
Center bore
70.1 mm
Thread pitch
12x1.5
Lug type
nuts
Set type
Square or staggered
Submodels
S2000, 2001-2009
Generations
2001-2009 Honda S2000, 5x114.3
Fitment check
Run against your exact year, trim and brake package before the set ships
Sort:
0 of 0
Nothing in the catalogue fits that combination yet.
Common questions
What bolt pattern is an S2000
5x114.3 with a 70.1 mm bore and M12x1.5 lug nuts on the AP1 and AP2. The bore is the catch: it is larger than the 64.1 on a Civic or Integra, so a wheel bored for those does not go on. The sizes that clear come from the trim and the brake package, so pick both above and the page prints them.
What offset for S2000 wheels
High. A 17x9 rear needs to stay well above the offsets people run on a Z or a G, or it pokes. The page prints the range per width, and the fitment check adjusts once you pick a drop. The brake package moves the answer, so pick the trim above and the grid drops anything that hits a caliper.
Can I run a square setup on an S2000
Street cars keep the factory stagger or go a half inch wider at each end. Set the year, trim and ride height above and the page answers it for your car.
Do AP1 and AP2 wheels interchange
Yes, the hub, pattern and bore are the same across 2000 to 2009, and the AP2's 17s bolt straight onto an AP1. The AP2's wider rear tire is the only reason to think about the two differently. The fender decides the width and the caliper decides the rest, so pick your trim above and the page answers it.
Shop S2000 wheels by bolt pattern, size and finish