F1R wheels and rims

26 products

F1R sells the deep dish and the multi piece look in a cast wheel. That's why it turns up on a 240SX or an IS300 with a lip that looks like it cost three times what it did. The FS3 is the mesh people search first, and the FC5 is there if you want the lip without a mesh over it.

F1R at a glance

Makes
26 wheels
Designs
11: F21 v2, F21 v2 Machine, F103, F106, FC5, FC7, FS1 and FS3 among others
Finishes
15 named, mostly black, bronze and silver
Diameters
18 to 20 inch
Widths
8.5 to 10 inch
Bolt patterns
6: 5x114.3, 5x112, 5x100, 5x120, 5x108 and 5x110
Price from
$219 per wheel
Ships in
2 to 7 days

About F1R wheels and rims

It's all cast, with a painted center and a machined or polished lip on the Machine versions. The 5x114.3 drilling carries the most sizes, and the European and older Honda patterns fill in the rest. Those low rear offsets are the entire point of the brand, and they're also what catches a fender.

Be honest with yourself about ride height before you order. A wide F21 in the offset F1R sells pokes on most cars sitting at stock, and that's the whole point of it. The rest want a roll, a drop or a camber kit before they look like the photo you saved.

Common questions

Are F1R wheels two piece
No, they're one piece castings with a machined or polished lip that gives you the two piece look. On the Machine versions that lip gets cut on a lathe after painting, which is where the contrast comes from. There's no separate lip bolted on, and the hardware you see on some designs is decorative.
Does the F1R FS3 fit a Civic
Yes, the FS3 in 5x114.3 fits the eighth through eleventh gen Civic. A square set is the usual call. Which offset you take is the question. F1R sells this design in offsets that poke on a stock Si, and the photos never mention it. Pick your Civic up top and you'll see what clears as it sits.